Design & Construction Job Descriptions & Questions
What is Construction Insulation Workers, Mechanical Job Description ?
Properly insulated buildings reduce energy consumption by keeping heat in during the winter and out in the summer. Vats, tanks, vessels, boilers, steam and hot-water pipes, and refrigerated storage rooms also are insulated to prevent the wasteful loss of heat or cold and to prevent burns. Insulation also helps to reduce the noise that passes through walls and ceilings. Insulation workers install the materials used to insulate buildings and equipment.
Insulation workers cement, staple, wire, tape, or spray insulation. When covering a steam pipe, for example, insulation workers measure and cut sections of insulation to the proper length, stretch it open along a cut that runs the length of the material, and slip it over the pipe. They fasten the insulation with adhesive, staples, tape, or wire bands. Sometimes, they wrap a cover of aluminum, plastic, or canvas over the insulation and cement or band the cover in place. Insulation workers may screw on sheet metal around insulated pipes to protect the insulation from weather conditions or physical abuse.
When covering a wall or other flat surface, workers may use a hose to spray foam insulation onto a wire mesh that provides a rough surface to which the foam can cling and that adds strength to the finished surface. Workers may then install drywall or apply a final coat of plaster for a finished appearance.
In attics or exterior walls, workers may blow in loose-fill insulation. A helper feeds a machine with fiberglass, cellulose, or rock-wool insulation, while another worker blows the insulation with a compressor hose into the space being filled.
In new construction or on major renovations, insulation workers staple fiberglass or rock-wool batts to exterior walls and ceilings before drywall, paneling, or plaster walls are put in place. In making major renovations to old buildings or when putting new insulation around pipes and industrial machinery, insulation workers often must first remove the old insulation. In the past, asbestosnow known to cause cancer in humanswas used extensively in walls and ceilings and to cover pipes, boilers, and various industrial equipment. Because of this danger, U.S. Environmental Protection Agency regulations require that asbestos be removed before a building undergoes major renovations or is demolished. When asbestos is present, specially trained workers must remove it before insulation workers can install the new insulating materials
Insulation workers use common handtools, including trowels, brushes, knives, scissors, saws, pliers, and stapling guns. They may use power saws to cut insulating materials, welding machines to join sheet metal or secure clamps, and compressors to blow or spray insulation.