CHARLES S. HELTON 1926 Michelle Lane Monroe Ohio 45044 513- 375-5129 charleshelton12[at]aol.com
Project Safety Manager Union and Non-Union Environments
Hands-on management leading successful corporations developing and implementing ISSPP (Integrated System Safety Program Plan) that governs procedures for conducting Project Safety Programs. The system safety program provides a means to systematically identify and eliminate or control identified safety risks and to provide an assessment of the safety risks. It is the basis from which the Safety Project Manager can generate safety activities and/or plans which will assure an acceptable level of safety through interface evaluations, risk control, and reporting methods acceptable to the project and its oversight agencies. Development of safety activities that are tailored to cost-effectively perform those tasks which are required to assure safety for personnel, equipment, and facilities throughout all phases of project activities. The total safety activity will assure that an acceptable risk level is achieved by providing insight into the system design and activities, and that the Project Safety Manager can certify that the entire Project system is safe to utilize. This is accomplished by hazard identification, hazard elimination or hazard control and the management/technical approaches used to minimize the risk of mishaps. I also establish and maintain an effective administrative procedure for reporting, cataloging, tracking and resolving identified hazards.
Strengths:
Decreased lost time injuries by 20% at Chrysler Twinsburg Stamping Plant through the implementation of a well documented and thorough safety training program. Reduced construction overall insurance costs by 22% through the integration and coordination of the system safety efforts, including dissemination of the system safety requirements to action organizations and contractors, along with the generation and distribution of hazard analyses.
AREAS OF EXPERTISE
Provide for the identification and elimination/control of personnel or critical hardware safety hazards by performing preliminary hazard analysis and, on safety critical items, by developing and implementing appropriate (sub) system and operational hazard analysis, as well as defining safety design criteria, verification tests, inspections, and assessment reports. Minimize mishap risk and prevent the occurrences of accidents resulting in personal injury or death, catastrophic facility or equipment damage, or project delay. Translate government imposed safety requirements into specific safety criteria, engineering requirements, and formal procedures. Disseminate safety information to designated design, engineering, contractors, and construction project management. Apportion the safety effort and resources in a manner commensurate with the magnitude of the hazards and risks to minimize costs and complexity. Establish and maintain administrative procedures for reporting, cataloging, tracking and resolving identified hazards.
PROFESSIONAL EXPERIENCE
Selected Engagements / Projects
Developed System Safety Program Milestones Elegant Estates (commercial and residential builder) for all construction projects. As Project Safety Manager I developed a schedule of the necessary safety activities (e.g., meetings, checklists, prepare the hazard Listing for review and Catalog which constitutes the Preliminary Hazard Analysis report completion and Project coordination efforts for all construction projects. As the project progressed this document and schedule would be updated and re-boarded to assure that all areas understand the impacts and are able to provide the required safety reporting. Developed System Safety Requirements U.S. Steel new construction development group (commercial builder partner). In addition to the general internal safety requirements I administered to and trained contractors and sub-contractors in the external governmental organizational requirements such as OSHA, DOT, DOE, etc. This program was documented and cataloged to encourage a safer construction workplace. Developed System Safety Methods - A.K. Steel as Safety Manager I was able to prepare the Hazard Listing and catalog which constitutes the Preliminary Hazard Analysis. This package documents all hazards or potential hazards resulting from Operational Systems, subsystems, and associated support equipment.
Ross Brothers Construction, Ashland Ky. 2007- Present Project Safety Manager / Special Assignment To assure the safety of hardware and personnel, I am accountable for Operational Safety documents and ensure they will be in place for each location before personnel are present, and shall be the safety documents followed during construction of Projects. During facility commissioning and construction, with various contractors on-site along with personnel, the Site Operational Safety document shall be the prime controlling safety documents. On-site contractors have to understand and integrate their safety systems to satisfy the construction safety requirements and procedures. When safety hazards are identified by the system or contractor personnel that affect the safe operation between contractor safety procedures and operational safety requirements/procedures, I have the authority and responsibility to cease all work in the affected area(s) until safe procedures can be generated and incorporated into both our company and contractor safety documentation. Such action may require us or the contractor personnel specific training and certification before work can be resumed.
Legacy Custom Homes of Cincinnati, Cincinnati Ohio, 2005 2008 Project Safety Manager / Sub-contractor Safety Compliance Coordinator. I was accountable for the Project Safety Plan and documenting requirements that define the approach to ensure safety for personnel, equipment, and facilities throughout all phases of Project construction activities. I would define acceptable risk consistent with Project goals and resources. The object of my safety system plan was to identify the (1) processes to determine the potential hazards associated with each Project and (2) courses of action for reducing these hazards to an acceptable level. This activity was documented, reviewed and approved. The process results are the basis for generating the site specific Operational Safety Plans and the various Operational Safety Procedures that will implement the risk reducing courses of action, to include corrective activities in the event of a mishap.
Elegant Estates Commercial & Residential Contractor, Cincinnati Ohio, 1994 2005 Project Safety Manager/Fire prevention Establish and conduct jobsite orientation for all employees and sub-contractors. Conducted and documented weekly safety meetings and producing weekly meeting minutes. Served as liaison between all sub-contractor safety representatives and supervision establishing pre-planned safety regulations and requirements fulfillment. Developing a complete OSHA, DOT, DOE, etc. regulatory training and documentation programs enlisting all sub-contractors to comply with safety regulations. Translate government imposed safety requirement s into specific safety criteria and holding accountable each sub-contractor for site compliance. Enlisted outside resources, such as but not limited to, insurance inspection teams, local fire departments, equipment manufactures, etc. to assist in safety and health risk identification. The use of these outside agencies reduced insurance costs, increased resources while controlling our budget.
UNITED STATES STEEL, Troy, MI, 19881994 Project Safety Manager (New Commercial Development Group) Developed and implemented Project System Safety Plans for new construction. Managed and applied applicable systems during new construction and large renovation projects. Conducted daily or weekly site inspections, completing safety inspection checklist, identifying non compliance items and finalizing a time bound corrective action plan.
Other positions held A.K. Steel, Special Assignment - New Construction and Renovation Safety Coordinator.
TRAINING
Confined Spaces/limited access safety considerations and documentation Hazard controls recommendations to eliminate, minimize or control hazard Safety mechanization of design (i.e., pressure relief mechanisms, emergency disconnect, etc.) Occupational Safety and Health Administration compliance, training and record keeping Use of cranes High Voltage Hazard group and category Shipping, storing, and handling of hazardous materials.
EDUCATION AND PROFESSIONAL DEVELOPMENT
BA, Business Administration, minor Safety Management, Ohio University, Athens, 1984
Computer Proficient in MS Office suite and MS Project
Professional Development Predictive and Preventative Maintenance; Maintenance Outage Scheduling and Managing
References Professional Pete Mooney United States Steel 810-444-2569 or 2534, pjmooney1[at]aol.com Wenona Dr. Wixom Michigan, 48393. Robert Harte AK Steel 606-923-3650 rgharte[at]adelphia.com 3022 Garver Rd. Ashland, Kentucky 41102 Darryl Makepeace Phoenix & Cumberland Consulting 858-673-0198 darrymakepeace[at]aol.com
Personal Lew Davis 513-860-5100 Fairfield Ohio (Pastor Tri-County Baptist Church) Steve Grace 513-641-9696 Hamilton Ohio Ray Spurlock 513 720-1322 Lebanon
|