Stevan Cook Journeyman Electrician


EXPERIENCE

THE SIEBOLD COMPANY,INC CORAL SPRINGS,FL
Journeyman Electrician 1/23/06 to 11/14/08

Planned layout, installed rigid conduit for conveyor systems
used at the US Postal Service.

Installed power panels and all equipment associated with
conveyor system.

Pulled wire through conduit and terminated all panels,
Motors, and photo eyes that control conveyor.

Used fork lift to set equipment and move materials on site.

Maintained tools and equipment and kept supplies and parts in order.













Mustang Electric Mustang , Ok
Journeyman Electrician9/22/05 to 1/13/06
Planned layout, installed and repaired wiring, electrical fixtures, apparatus and control equipment.
Measured, cut, bent, threaded, assembled and installed electrical conduit, using tools such as hacksaw, pipe threader and conduit bender.
Pulled wiring through conduit, assisted by electrician assistant, to install and repair electrical wiring, fixtures and equipment.
Performed minor repairs, such as replacing fuses, light sockets, bulbs and switches.
Maintained tools and equipment and kept supplies and parts in order.
Disassemble defective electrical equipment, replaced defective and worn parts and re-assembled equipment.
Connected power cables to equipment, such as electric ranges and motors, and installed grounding leads.
Tested continuity of circuits to ensure electrical compatibility and safety of components, using testing instruments, such as ohmmeters.
Observed functioning of installed equipment and systems to detect hazards and need for adjustments, relocation, and replacement.

Stratus Inc Chattanooga ,Tn 37422
Spinning Operator06/2003 to 08/2005
Tended machines that heated and formed nylon filament .
Mounted reels of filament on machine spindles and threaded filament through guides and tension bars into electrically heated devices.
Threaded filament between forming dies and through cooling tubes to take-up reel.

Trained other employees to operate machines .
..

Fru-Con Construction Co Chattanooga,Tn
Jouneyman Electrician 6/2002 to 10/2003
Planned layout, installed and repaired wiring, electrical fixtures, apparatuses and control equipment.
Planned new and modified installations to minimize waste of materials, provide access for future maintenance and avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical codes.
Gathered tools and supplies to be used at work site.
Connected wiring to lighting fixtures and power equipment.
Installed control and distribution apparatuses, such as switches, relays and circuit-breaker panels, fastening them in place with screws and bolts.
Pulled wiring through conduit, assisted by electrician assistant, to install and repair electrical wiring, fixtures and equipment.
Maintained tools and equipment and kept supplies and parts in order.
Measured, cut, bent, threaded, assembled and installed electrical conduit, using tools such as hacksaw, pipe threader and conduit bender.

Watson Electric Company Charlotte,NC
Journeyman Electrician 11/01 to 5/02
Planned layout, installed and repaired wiring, electrical fixtures, apparatuses and control equipment.
Planned new and modified installations to minimize waste of materials, provide access for future maintenance and avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical code
Measured, cut, bent, threaded, assembled and installed electrical conduit, using tools such as hacksaw, pipe threader and conduit bender.
Assisted in lifting, positioning and fastening objects, such as wiring, conduit and motors.
Pulled wiring through conduit, assisted by electrician assistant, to install and repair electrical wiring, fixtures and equipment.
Gathered tools and supplies to be used at work site.

IBEW Local 175 Electricians UnionChattanooga,Tn
Journeyman Electrician1988 to 10/31/01




Education:NJATC Local 175 ApprenticeshipChattanooga,Tn
Diploma, Journeyman license1989 to 1993

References:Available upon request